Where should I connect my remote wire?

Let’s learn where should I connect my remote wire. The most accurate or helpful solution is served by ChaCha.

There are ten answers to this question.

Best solution

Answer:

Disconnect the ground cable from your battery first and foremost. NEVER work on the electrical system...

Read more

Anonymous at ChaCha Mark as irrelevant Undo

Other solutions

Where does my amp remote wire connect to my head unit?

i have a pioneer DEH-P4700MP head unit and need help finishing wiring it to my amp. i have all the cords ran through the car but cant determine where the remote wire from the amp ...show more

Answer:

The amp turn on does just what it says..........the solid blue wire is for the anntennas that go up...

Read more

2CZJW4BMSXU7WHMFPZBMWOTIJA at Yahoo! Answers Mark as irrelevant Undo

Where do I connect the remote wire when using a stock stereo head?

I am adding an amp to my friend's car for the sub woofers he just bought. I am using a line converter for the signal. The only problem I am having is that I need a place to run the remote wire to turn on the amp. It's a 98 Camry with a stock stereo head...

Answer:

try testing the black and red wire that comes out of the stereo to see if it cuts on and off with the...

Read more

Vikkonen at Yahoo! Answers Mark as irrelevant Undo

Where does the remote wire connect to on my head unit?

I have a 12-pin aftermarket stereo harness, not the normal 16-pin. Because of this, my stereo does not include a blue with white stripe remote wire. I've looked online and two ...show more

Answer:

You csn buy fuse taps. You get the accessory wire and butt connect it to the heaunit then get a fuse...

Read more

5T3MA4UO5UF3ARHLRPQHRUA2Y4 at Yahoo! Answers Mark as irrelevant Undo

Where do i connect the remote wire from my amp to?

im trying to connect the amp to my home theatre receiver not a car. its a small 240 watt mosfet amp

Answer:

...0...

Read more

SIKKO at Yahoo! Answers Mark as irrelevant Undo

Do I need to connect my remote wire to BOTH my remote terminal AND power terminal?

So I paid Best Buy to put in an aftermarket stereo. They connected my remote wire correctly to the stereo. I ran all of the wires myself to my sub. Problem is, it won't turn on. All fuses are intact, everything is kosher (ground, wires through firewall...

Answer:

your remote turn on wire is to be connected to the remote turn on contact on the amplifier ONLY.if your...

Read more

Yiwen at Yahoo! Answers Mark as irrelevant Undo

What wire from my bulldog remote starter do i connect to my keysense wire? i have a 2003 saturn L series?

i installed the starter and the bypass module and everything works great its just that i dont know what to wire to hook up to my keysense wire in my car to keep the check engine light from coming on. i am thinking its the factory alarm disarm wire from...

Answer:

I don't know what model starter and bypass you are using. But read through your instructions, and there...

Read more

CJ at Yahoo! Answers Mark as irrelevant Undo

Amp No POWER - power wire reads 12V on meter but when i connect to amp,drops to 1V or less,remote wire is fine

I have tested my power and ground wire both connected to a power meter and it reads 12v. I have tested the remote wire connected to the amp, reads 12v as well. Connected the ground wire, and connect the power, when I check power on the line after it...

Answer:

that is definitely strange.... The power wire should be connected to the battery and fused within 8...

Read more

qwertyti... at Yahoo! Answers Mark as irrelevant Undo

Which wire do I connect the remote wire to?

I want to connect my amp to my factory head unit in my 2007 chevy cobalt.. and I took my head unit out, now all I have to figure out is which wire to connect the remote wire to.. people say blue and I've also heard red.. but there are 2 blue wires.....

Answer:

The factory radio in the '07's don't have a remote wire. The factory system is all controlled by data...

Read more

Mike at Yahoo! Answers Mark as irrelevant Undo

I would like to know if you can actually connect the amp without the remote wire.?

I cant get into the HU since its a factory Navigation unit and there is no way I can get to the remote wire from the HU. I try to connect but no power to the amp. I also put a switch on the power wire that goes to the amp to turn on and off the power...

Answer:

You can use any switched 12v source (I've used the cigarette lighter before) for the remote. Also, I...

Read more

macxphix... at Yahoo! Answers Mark as irrelevant Undo

Related Q & A:

Just Added Q & A:

Find solution

For every problem there is a solution! Proved by Solucija.

  • Got an issue and looking for advice?

  • Ask Solucija to search every corner of the Web for help.

  • Get workable solutions and helpful tips in a moment.

Just ask Solucija about an issue you face and immediately get a list of ready solutions, answers and tips from other Internet users. We always provide the most suitable and complete answer to your question at the top, along with a few good alternatives below.